Yamada Pneumatic Pumps

DMT we are exclusive distributors for Spain of Yamada pneumatic diaphragm pumps

NDP-5 Serie

Maximum capacity: 11.7 l/m (3.1 GPM).
Connection: ¼” (5 mm).
Maximum temperature by material: Polypropylene (PPG) 82°C (180°F) – Kynar® (PVDF) 100°C (212°F) – Conductive acetal 82°C (180°F) – Aluminium (ADC-12) 100°C (212°F) – Stainless steel (316) 100°C (212°F).
Pressure: 1.4 – 7 bar (20 – 100 PSI).
Discharge volume per cycle: 29 cc (0. 078 American gallons).
Maximum dry suction lift: 1.5 m (5 feet).

Maximum capacity: 22 l/m (6 GPM).
Connection: 3/8“ (10 mm).
Discharge volume per cycle: 76 cc (0,020 American gallons).
Maximum temperature by material: Neoprene: 82°C (180°F) – Buna N 82°C (180°F) – Hytrel® (TPEE) 120°C (248°F) – Santoprene® (TPO) 100°C (212°F) – Viton® fluoroelastomer 120°C (248°F) – Teflon® (PTFE) 100°C (212°F).
Pressure: 1.4 – 7 bar (20 – 100 PSI).
Maximum dry suction lift: 3 m (10 feet).
Maximum solid particles sizes: 1 mm (1/32“).

Maximum capacity: : 28 l/m (7,4 GPM).
Connection: 1/2“(15 mm).
Discharge volume per cycle:93 cc (0,025 American gallons).
Maximum temperature by material: Neoprene: 82°C (180°F) – Buna N 82°C (180°F) – Hytrel® (TPEE) 120°C (248°F) – Santoprene® (TPO) 100°C (212°F) – Viton® fluoroelastomer 120°C (248°F) – Teflon® (PTFE) 100°C (212°F).
Pressure: 1.4 – 7 bar (20 – 100 PSI).
Maximum dry suction lift: 3 m (10 feet).
Maximum solid particles sizes: 1 mm (1/32“).

Capacidad máxima: 22 l/m (6 GPM).
Conexión: 3/8“ (10 mm).
Volúmen de descarga por ciclo: 76 cc (0,020 galones americanos).
Altura máxima de aspiración en seco: Todas las membranas: 1,5 m (5 pies).
Temperatura máxima por material: Neopreno: 82°C (180°F) – Buna N 82°C (180°F) – Hytrel® (TPEE) 120°C (248°F) – Santoprene® (TPO) 100°C (212°F) – Fluoroelastomer Viton® 120°C (248°F) – Teflon® (PTFE) 100°C (212°F).
Presión: 1,4 – 7 bar (20 – 100 PSI).
Dimensiones máximas de las partículas sólidas: 1 mm (1/32”).

Maximum capacity: 51 l/m (13.5 GPM).
Connection: ½” (15 mm).
Discharge volume per cycle: 128 cc (0.034 American gallons).
Maximum dry suction lift: Flat check valve: 2.4 m (8 feet) – Ball check valve: 1.5 m (5 feet).
Maximum temperature by material: Neoprene 82°C (180°F) – Buna N 82°C (180°F) – Hytrel® (TPEE) 120°C (248°F) – Santoprene® (TPO) 100°C (212°F) – Viton® fluoroelastomer 120°C (248°F) – Teflon® (PTFE) 100°C (212°F).
Pressure: 1.4 – 7 bar (20 – 100 PSI).
Maximum solid particles sizes: 1 mm (1/32“).

Maximum capacity: 120 l/m (31.7 GPM).
Connection: 3/4” (20 mm).
Maximum temperature by material: Neoprene 82°C (180°F) – Buna N 82°C (180°F) – EPDM 100°C (212°F)
Hytrel® (TPEE) 120°C (248°F) – Santoprene® (TPO) 100°C (212°F) – Viton® fluoroelastomer 120°C (248°F)
Teflon® (PTFE) 100°C (212°F).
Pressure: 1.4 – 7 bar (20 – 100 PSI).
Discharge volume per cycle: Rubber diaphragm: 615 cc (0.163 American gallons) – PTFE diaphragm: 539 cc (0.143 American gallons).
Maximum solid particles sizes: 2 mm (1/16”).
Maximum dry suction lift: Capacity of pumps with rubber components: 5.5 m (18 feet).

Maximum capacity: 170 l/m (46.2 GPM).
Connection: 1” (25 mm).
Maximum temperature by material: Neoprene 82°C (180°F) – Buna N 82°C (180°F) – EPDM 100°C (212°F)
Hytrel® (TPEE) 120°C (248°F) – Santoprene® (TPO) 100°C (212°F) – Viton® fluoroelastomer 120°C (248°F) – Teflon® (PTFE) 100°C (212°F).
Pressure: 1.4 – 7 bar (20 – 100 PSI).
Discharge volume per cycle: Rubber diaphragm: 833 cc (0.22 American gallons) – PTFE diaphragm: 787 cc (0.21 American gallons).
Maximum solid particles sizes: 4.8 mm (3/16“).
Maximum dry suction lift: Capacity of pump with rubber components: 5.5 m (18 feet).

Maximum capacity: 405 l/m (107 GPM).
Connection: 1-1/2” (40 mm).
Maximum temperature by material: Neoprene 82°C (180°F) – Buna N 82°C (180°F) – EPDM 100°C (212°F)
Hytrel® (TPEE) 120°C (248°F) – Santoprene® (TPO) 100°C (212°F) – Viton® fluoroelastomer 120°C (248°F) – Teflon® (PTFE) 100°C (212°F).
Pressure: 1.4 – 7 bar (20 – 100 PSI).
Discharge volume per cycle: Rubber diaphragm: 2.74 litres (0.73 American Gallons) – PTFE diaphragm: 1.40 litres (0.37 American Gallons).
Maximum solid particles sizes: 7 mm (9/32”).
Maximum dry suction lift: Capacity of pump with rubber components: 5.5 m (18 feet).
Series motor: pneumatic of aluminium: Optional: Epoxy or Teflon® coating or non-electrolytic nickel plated.

Maximum capacity: 620 l/m (164 GPM).
Connection: 2” (50 mm).
Maximum temperature by material: Neoprene 82°C (180°F) – Buna N 82°C (180°F) – EPDM 100°C (212°F) Hytrel® (TPEE) 120°C (248°F) – Santoprene® (TPO) 100°C (212°F) – Viton® fluoroelastomer 120°C (248°F) Teflon® (PTFE) 100°C (212°F).
Pressure: 1.4 – 7 bar (20 – 100 PSI).
Discharge volume per cycle: Rubber diaphragm: 4.25 litres (1.12 American gallons) – PTFE diaphragm: 2.61 litres (0.69 American gallons).
Maximum solid particles sizes: 8 mm (5/16”).
Maximum dry suction lift: Capacity of pump with rubber components: 5.8 m (19 feet).
Series motor: pneumatic of aluminium: Optional: Epoxy or Teflon® coating or non-electrolytic nickel plated.

Maximum capacity: 620 l/m (164 GPM).
Connection: 2” (50 mm).
Maximum temperature by material: Neoprene 82°C (180°F) – Buna N 82°C (180°F) – EPDM 100°C (212°F)
Hytrel® (TPEE) 120°C (248°F) – Santoprene® (TPO) 100°C (212°F) – Viton® fluoroelastomer 120°C (248°F)
Teflon® (PTFE) 100°C (212°F).
Pressure: 1.4 – 7 bar (20 – 100 PSI.
Discharge volume per cycle: Rubber diaphragm: 4.25 litres (1.12 American gallons) – PTFE diaphragm: 2.61 litres (0.69 American gallons).
Maximum solid particles sizes: 8 mm (5/16”).
Maximum dry suction lift: Capacity of pump with rubber components: 5.8 m (19 feet).
Series motor: pneumatic of aluminium: Optional: Epoxy or Teflon® coating or non-electrolytic nickel plated.